|
| STEP 1
Before coating your garage floor, review the detailed instructions in the kit. | |
|
| STEP 2
Prepare the floor: Remove any oil or grease spots using a cleaner/degreaser and a scrub brush. Mix the concentrated cleaner
(included in kit) with 2 gallons of water. Apply to the surface and scrub in 10’x10’ sections using a stiff bristle brush. Rinse thoroughly. | |
|
| STEP 3
Mix the coating: Pour EPOXYShield Garage Floor Coating Part A into Part B and stir. Allow to stand - see the detailed instructions for the appropriate standing time. If you want to add anti-slip additive, add it to the mixed coating now. | |
|
| STEP 4
Apply the coating: Cut in around the edges of your garage with a brush. Use a roller to apply EPOXYShield to the floor in 4’x4’ sections. Toss the decorative paint chips onto the wet film as you finish each section. | |
|
| STEP 5
Your garage floor will be ready to walk in in 12-16 hours and ready for heavy items in 24-48 hours. Allow 7 days for full cure and vehicle traffic. | |
